Single Shaft Mixers

1. Technical Specifications of our single shaft mixers, which are 100% our own production:

The drive power is provided by the help of a two separate motors and a reducer. Therefore, when one of the motors or gears is broken down, the capacity is reduced to half and concrete production can continue by a single motor.

2. As the number of bearings is not many, the potential problems in the bearings are minimized. Besides, the bearing system is located on the external part and thus the concrete production continues without interruption due to a potential grout leakage.

3. As the drive force is generated on both sides, the concrete production can be performed at lower slump.

4. As the concrete discharge system is pneumatic, concrete can be easily discharged by opening the discharge door even in case of power cuts.

5. As the arms of the mixer are helical, the arms rotate by scraping the whole mixer wall, which consequently removes the necessity to clean further.

6. The time needed for cleaning is shorter when compared to other mixers.

7. Thanks to the drive system properties, wearing is minimized. This allows getting maximum efficiency out of the machine by preventing the potential costs.

8. The bearing life time is longer thanks to the time adjusted automatic lubrication system.

9. Concrete batching period is very short thanks to rotation of helical arms in a parallel plane to the mixer wall.

10. As the mixer internal plates are same in most sections, over-wearing parts can be relocated, providing a long lasting utilization.

11. All walking platforms are hinged, offering a fast and easy installation.